Skip to main content
FREE Delivery!|(504) 389-7856
Gravel, Stone and Soil for Washington Parish, LA

Gravel, Stone and Soil for Washington Parish, LA

Louisiana Rock Supply handles gravel, stone and aggregate delivery in Washington Parish, LA. Work here runs year round, set by how wet the ground is rather than how cold it is.

Across the Florida parishes pine flatwoods, a sandy surface sits over a dense subsoil that holds water. That is why 610 limestone is the base to start from on drives and pads.

Ground Conditions Across Washington Parish

Flatwoods ground is level to gently sloping terrace under pine. The surface is sandy or silt loam, and under it sits a dense, slowly permeable subsoil.

Seasonal high water rises into the top of the profile in the wet season and stays. The surface looks free draining and the layer under it is not.

So the drainage layer is the part that has to work. A base course over wet ground without one has nowhere to shed water.

Erosion on bare flat ground comes as sheet flow, ditch scour, and rill cutting in the sandy surface. Exposed grade is where it starts.

That puts a premium on getting a cover on grade and on armouring any channel edge. Frost is not a factor in design here.

Materials Delivered in Washington Parish

610 limestone is the Louisiana base size, also called #610, 610 base, or CR610. The designation carries everything from stone dust up to about two inches, so the fines bind it and it hardens as it is rolled.

Louisiana DOTD sets aggregate quality in Section 1003 of the Louisiana Standard Specifications for Roads and Bridges. Soundness and abrasion sit in Subsection 1003.01, and a source has to meet Section 1003 to appear on the approved materials list.

Order 610 limestone for driveways, parking pads, shed and building pads, and the compacted layer under flatwork.

Crushed concrete is recycled Portland cement concrete, crushed and screened to a dense graded size with the fines left in. Louisiana permits it as a Class II base course material.

It is not crushed limestone.

Clean stone starts at #57 limestone, about 3/4 inch with no fines. It goes to driveway surfacing, drainage and concrete work.

Below that, #67 stone is a little finer for drainage trenches, pipe bedding and concrete. #8 crushed stone is roughly 3/8 inch for paver bedding.

Washed sand beds pipe and flatwork and sets pavers, and Louisiana yards also call it river sand. Mason sand is the finest washed grade, for mortar, brick and block.

Select fill raises low ground and builds a pad up out of the water. Spillway dirt is a second Louisiana yard term for coarse borrow fill.

Order select fill under a base course, not under a lawn.

Top soil is the growing layer for lawns and beds. Garden soil is a blended planting soil, and raised beds suit ground that sits wet.

Delivery Across Washington Parish

Bulk material arrives by dump truck and is tipped on site in one pile. The driver does not spread or place it.

Have the drop area clear before the truck arrives. Leave room for the bed to tip and for the pile to land where you want it to sit.

Order online and choose a quantity by the ton or by the yard. Each product page has a calculator to size the load, and you pick a delivery date at checkout.

Louisiana Rock Supply delivers across Washington Parish, including Bogalusa, Franklinton, Angie and Mount Hermon.

For placement, work from the pile with your own equipment. Gravel, stone, sand, topsoil and fill all arrive the same way.

Choosing the Right Material

St. Tammany Parish and Tangipahoa Parish sit in the same region and the same ground region as Washington Parish.

Both are Florida parishes pine flatwoods, with the same sandy surface over a dense, slowly permeable subsoil and the same seasonal high water.

The ground is the same, so the base and drainage choices are the same. Pick by what the material does, not by which parish line you are on.

Order Gravel, Stone and Soil in Washington Parish

Louisiana Rock Supply delivers base, washed stone, sand, soil and decorative rock across Washington Parish. Driveways, pads, drainage, paver beds, raised gardens and bank edges all start with the right material.

Order online when you are ready.

Towns we deliver to in Washington Parish

Before you order

What buyers ask us before they order.

What is the difference between topsoil and fill dirt?

Topsoil is the growing layer, for lawns, beds and grade repair. Fill dirt is structural: select fill raises low ground and builds a pad up out of the water, and it compacts rather than settling. Use fill under a base course and topsoil on top where something has to grow. Louisiana yards also list river silt and spillway dirt beside fill as grade raising materials.

What is 610 limestone and what is it used for in Washington Parish?

610 limestone is the Louisiana dense graded base size, also called #610, 610 base, or CR610. It runs from stone dust up to about two inches, so the fines bind it and it hardens as it is rolled. Order it for driveways, parking pads, shed and building pads, and the compacted layer under flatwork.

How deep should a gravel driveway base be in Washington Parish?

Base depth depends on your ground and your load, so the honest answer is that it varies by site. On flatwoods ground the subsoil is dense and slowly permeable, and the water table rises into the root zone in the wet season. Work out your quantity with the calculator on the product page once you know your own numbers.