Skip to main content
FREE Delivery!|(504) 389-7856
Kenner, LA Rock, Gravel and Soil Delivery

Kenner, LA Rock, Gravel and Soil Delivery

Kenner is a mid-size city in Jefferson Parish with ZIP codes 70062 and 70065. Louisiana Rock Supply provides bulk materials for lawn grading, planting beds, low spots and hardscape preparation. Plan the material around the finished grade, drainage path and the access available for delivery.

Bulk materials for Kenner projects

For a firm pad, driveway foundation or paver base, 610 Limestone is the local trade name to request. It is also called #610, 610 base and crushed limestone base, and it aligns with DOTD Section 1003 Class II base course. Natural Pea Gravel works for loose-finish paths and decorative ground cover, while Select Fill gives crews material for raising low areas before finishing with topsoil or garden soil.

Measure the length and width of each area, then use the planned depth to calculate cubic yards or tons. Keep fill, base and finish material as separate line items. That makes it easier to place Select Fill first, compact the structural layer, then bring the final surface up to grade.

Ground, frost and drainage for Kenner work

Louisiana drainage conditions call for careful grade planning. High water tables, gumbo clay and subsidence mean a pad needs to hold its shape while wet. Build the finished surface up where the project grade requires it instead of relying on a deep excavation, and direct water away from the work area.

Use compacted lifts rather than placing the full depth in one heavy layer. For driveways, shed pads and similar work, install the base to the depth required by the load and site conditions, then compact each lift before placing the next. A contractor can set the final grade and determine where added Select Fill is needed.

Louisiana's statewide frost-depth guide is 6 inches. Confirm frost and foundation requirements with the local building department before starting structural work. Frost depth is only one part of the plan here, since drainage and wet-ground support need attention from the first lift upward.

Delivery planning in Kenner and nearby towns

Delivery planning for Jefferson Parish starts with a clear drop area and a truck route free of low branches, parked vehicles and soft ground. Tell the driver where the material should be placed, and keep the unloading area open. A firm, accessible approach matters when the load needs to go beside a driveway, pad or work zone.

Metairie in Jefferson Parish lies about 5 miles east of Kenner, while Westwego in Jefferson Parish lies about 11 miles south. Gretna in Jefferson Parish lies about 16 miles southeast, and New Orleans in Orleans Parish lies about 13 miles east. Mandeville in St. Tammany Parish lies about 23 miles northeast, while Ponchatoula in Tangipahoa Parish lies about 23 miles north.

For deliveries in 70062 or 70065, mark the desired placement point before the scheduled date. Keep gates open, move vehicles and equipment, and avoid directing a loaded truck across ground that has softened from water. If the project requires separate materials, make room to keep base stone, fill and finish gravel from mixing together.

Plan the material order

Use the online calculator to measure each project area and choose the depth for fill, base or finish material. Order online with a delivery date after the access route and placement area are ready.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Kenner, LA

How do I limit spring ruts in a gravel drive?

Start by correcting soft spots and shaping the drive so water leaves the surface. Use Select Fill where the grade needs to come up, then place and compact 610 Limestone in lifts for support. A loose layer of Natural Pea Gravel belongs on a stable base, not directly over wet, yielding ground.

How deep should a Kenner driveway base be with Louisiana's frost guide?

The statewide frost-depth guide is 6 inches, but driveway base depth should match vehicle loads, existing soil and drainage. A light-use drive and a heavier work area do not need the same build-up. Confirm local requirements with the building department, then compact the selected base in separate lifts.

Which local base should go under pavers or a shed in Jefferson Parish?

Use 610 Limestone for the compacted structural layer under pavers or a shed pad. It is the local name for material also called #610 or 610 base, with a DOTD Section 1003 Class II base course reference. Set the final depth and edge restraint around the project before spreading the base.

Which material should I use to raise a low planting area in Kenner?

Select Fill is suited to building up low areas and establishing the rough grade. Compact it in lifts where support is needed, then place topsoil or garden soil for planting. Keep the finished grade arranged so water moves away from structures and prepared pads.

Nearby