Skip to main content
FREE Delivery!|(504) 389-7856
610 Limestone and Bulk Materials in Rapides Parish, LA

610 Limestone and Bulk Materials in Rapides Parish, LA

Louisiana Rock Supply provides bulk material delivery across Rapides Parish, including Alexandria. 610 Limestone is the working base for pads, parking areas and road projects that need a compacted foundation. Across Louisiana, where a site has a high water table or gumbo clay, build the grade up as needed and use a base that holds together when wet.

Bulk Delivery Across Rapides Parish

Order online by the ton or the yard, use the calculator on each product page, and select a delivery date at checkout. Dump truck delivery is placed in one pile. We deliver in Alexandria, including ZIP codes 71301, 71302 and 71303.

Before ordering, check that the truck has a clear route to the unload point. Move vehicles, equipment and low hanging obstacles, and choose a firm spot where one pile will not block traffic or drainage.

Materials for Rapides Parish Projects

610 Limestone, also called #610 or 610 base, is listed as DOTD Section 1003 Class II base course. It is used below slabs, parking areas and roads because the mixed stone and fines compact into a firm layer. Road Base, also called recycled base or 610 concrete, is another compactable material for base work.

For a slab pad or limestone parking area, start with a stable grade and spread 610 Limestone in lifts. Compact each lift before placing the next. Base depth depends on traffic, finished elevation and the condition of the existing ground, with 4 to 8 inches used for many light-duty base applications.

For drainage coverage, #57 Limestone leaves open spaces between the stone. Natural Pea Gravel, Walkway Gravel and Large river rock are finish materials for walks, beds and driveway surfaces. Camp roads and other road work need a compacted base such as 610 Limestone or Road Base rather than loose finish gravel.

Ground Conditions to Check in Rapides Parish

Inspect the proposed unload area and the finished project area before ordering. Across Louisiana, where water remains near the surface or gumbo clay is present, digging down can leave a weak, wet section. Raising the grade with Select Fill and installing a compacted base above it gives the project a better working platform.

The statewide frost-depth guide is 6 inches, but confirm local requirements before building a slab, footing or other work that must meet a specific standard. Check drainage direction, existing grade, access for compaction equipment and the thickness needed for the planned use.

Choosing the Right Material

Use 610 Limestone for a driveway base, slab pad, patio base or camp road. Road Base also fits compacted driveway and pad work. Use #57 Limestone where drainage stone is needed, then keep the stone separated from soil with the right project preparation.

Use Natural Pea Gravel for a finished driveway surface, a walk or a bed. Use Select Fill to raise a lawn low spot before final grading. For a patio, place 610 Limestone below the finished surface, compact it in lifts, then use the selected bedding material for the patio system.

Order Materials for Rapides Parish

Measure the project, use the product calculator to size the order, and place it online by the ton or yard. Select the delivery date that fits the work schedule at checkout.

Towns we deliver to in Rapides Parish

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Rapides Parish

What should be ready when the dump truck arrives in Rapides Parish?

Mark the unload location and make sure the truck route is open. Remove parked vehicles and confirm that the pile location leaves room for spreading equipment. The driver places one pile, so decide where that pile gives you the best working room.

Should I use topsoil, Select Fill or sand to raise a low spot in Alexandria?

Select Fill is the choice for building up grade before a base or final surface is installed. Topsoil belongs near the finish for planting areas, not as structural fill beneath a pad or driveway. Washed sand fits bedding and leveling work where a clean sand layer is needed.

Should I order tons or cubic yards for 610 Limestone?

Use the calculator on the 610 Limestone product page after measuring length, width and planned depth. Tons measure weight, while cubic yards measure volume. Enter the project dimensions, review the result, and allow for the finished depth before placing the order.