Skip to main content
FREE Delivery!|(504) 389-7856
Bulk Material Delivery to Youngsville, LA

Bulk Material Delivery to Youngsville, LA

Youngsville is a small city or town in Lafayette Parish, with a 2024 census estimate of 19038. Lawn work, planting beds and low areas call for the right soil or fill before mulch, gravel or hardscape material goes down. Louisiana Rock Supply provides bulk materials for projects where site grading, drainage and a stable base need attention from the start.

Material choices for Youngsville projects

For slab pads, paver work and compacted drive areas, 610 Limestone is the local name for a DOTD Section 1003 Class II base course. Its blend of stone and fines locks together under compaction. Road Base, also called recycled base or 610 concrete, is another compacted base option for parking and access areas.

Natural Pea Gravel works well for exposed gravel surfaces around beds and walk areas. Topsoil supports lawn and bed preparation, while Select Fill is used to build up low ground in controlled lifts. Place fill in manageable layers, compact each lift as needed, then finish with topsoil where planting is planned.

Measure length by width for square footage, then multiply by planned depth. The calculator helps convert that volume into an order quantity. Keep base material, fill and topsoil separate in the plan because each belongs at a different level of the project.

Ground, frost and drainage in Lafayette Parish

The statewide frost-depth guide for Louisiana is 6 inches. Confirm frost and foundation requirements with the local building department before starting work that needs inspection. For driveways, shed pads and paver bases, depth should reflect traffic, soil support and water exposure instead of relying on the frost figure alone.

Water management deserves close attention. High water conditions, gumbo clay and subsidence call for pads built up above surrounding ground rather than cut deep into it. A compacted base needs to keep its shape while wet, so establish drainage before placing stone.

Plan the finished grade so water moves away from pads and structures. Use Select Fill in lifts to raise low sections, compact it as the work progresses, and reserve Topsoil for the final lawn or planting surface.

Delivery to Youngsville and nearby towns

Delivery planning covers Lafayette Parish and surrounding areas. Broussard lies about 6 miles northeast of Youngsville, Maurice lies about 8 miles west, and Lafayette lies about 9 miles north. Delcambre lies about 10 miles south, while Duson and Scott lie about 12 miles and about 13 miles northwest, respectively. Youngsville sits about 9 miles south of Lafayette.

Use ZIP code 70592 when entering the delivery location. Before booking, check that the truck has a clear approach, adequate overhead clearance and a firm unloading spot. Wet weather, site conditions and seasonal road limits can affect access, so book ahead when the project depends on a specific delivery date.

Plan the quantity before ordering

Use the calculator to enter your measured area and planned depth, then order online with a delivery date that fits the work schedule. Keep the unloading area ready before the material arrives.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Youngsville, LA

What stone should go around a French drain or downspout outlet?

Use clean #57 Limestone, also called 57 rock or clean limestone, around drain pipe where open spaces between stone are needed for water movement. Keep soil fines from washing into the stone with suitable fabric where the installation calls for it. Set the outlet so water drains away from the pad and does not collect at the discharge point.

How deep should a Lafayette Parish gravel driveway base be?

A light-use gravel drive commonly starts with 4 to 6 inches of compacted base, while vehicle traffic and weak wet ground call for 6 to 8 inches or more as the design requires. The statewide 6-inch frost guide is only one reference point. Focus on firm subgrade, drainage and compaction in lifts, then confirm project requirements with the local building department.

Which Youngsville base stone fits under pavers or a shed?

610 Limestone is the local base material for this work. It is also known as #610, 610 base and crushed limestone base, and it aligns with DOTD Section 1003 Class II base course. Spread it in lifts, compact each lift, and check final grade before setting pavers or building on the pad.

Which ZIP code should I use for this delivery area?

Use 70592 for the delivery address. Include clear site notes about the unloading location, gate access, surface conditions and any clearance concerns. Accurate directions help place the material where the crew needs it.

Nearby