Skip to main content
FREE Delivery!|(504) 389-7856
Bulk Rock and Soil for Gretna, LA Projects

Bulk Rock and Soil for Gretna, LA Projects

Gretna sits about 6 miles south of New Orleans. A new gravel drive, a regraded drive with worn spots, or a parking pad starts with the right base material and a plan for compaction. Louisiana Rock Supply lists bulk stone, sand and soil for homeowners and contractors planning work in the area.

Stone, base and soil materials for Gretna work

For a driveway that needs structure, 610 Limestone is the local base choice. Its fines and crushed pieces compact into a firm layer. #57 Limestone is a clean stone used where open space between pieces supports drainage, while Road Base is another base option for pads and drive areas. Topsoil, Washed sand and Shredded mulch cover finishing work around a completed project.

Measure the length and width of the drive or pad, then choose a compacted depth before using the calculator. Order extra material only after allowing for the depth needed at low areas and the compaction that occurs as each lift is packed. For a finished gravel surface, keep clean stone separate from the compacted base layer beneath it.

Ground, frost and drainage planning in Gretna

Water drives base preparation in Louisiana ground conditions. A high water table, gumbo clay and subsidence mean a pad needs to stay stable while wet. Build the grade up where needed instead of cutting deeper into wet ground, and place base in manageable lifts so each layer can be compacted before the next one goes down.

Louisiana's statewide frost-depth guide is 6 inches. Confirm frost and foundation requirements with the local building department before starting slab, footing or driveway work. For a gravel drive, base depth depends on vehicle weight, existing ground and how much water reaches the site. A compacted base in the 4 to 8 inch range is a common construction starting point, with added depth where soft ground or heavier traffic calls for it.

Delivery planning for Gretna and nearby towns

Gretna is in Jefferson Parish, with ZIP codes 70053 and 70056. New Orleans in Orleans Parish lies about 6 miles north of Gretna, while Westwego in Jefferson Parish lies about 10 miles west. Metairie lies about 14 miles northwest, and Kenner lies about 16 miles northwest, both in Jefferson Parish. Gretna sits about 6 miles south of New Orleans.

For wider area planning, Slidell in St. Tammany Parish lies about 30 miles northeast of Gretna, and Mandeville in St. Tammany Parish lies about 30 miles north. Before selecting a delivery date, check that the truck has a clear approach, enough room to turn or back safely, and a firm unloading location. Mark overhead obstructions, keep vehicles out of the unloading area, and choose a drop spot that does not block the work area.

Measure first, then schedule delivery

Use the calculator to enter the project length, width and depth, then select the material needed for the job. Place the order online and choose a delivery date after confirming site access and the drop location.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Gretna, LA

How deep should a Gretna gravel driveway base be with the 6-inch frost guide?

The 6-inch figure is Louisiana's statewide frost-depth guide, and local building department requirements should be confirmed for structural work. Driveway base depth is set by the ground condition and expected traffic rather than frost alone. Start with a planned compacted depth, place 610 Limestone in lifts, and compact each lift before adding more material.

Why is stone sold by the ton instead of cubic yards?

Stone weight changes with the material type and the amount of moisture in it, so tonnage provides a more dependable ordering unit for truck loading. Cubic yards measure volume, which works well for estimating a space before ordering. Use the calculator with the project dimensions, selected depth and product, then review the resulting quantity before checkout.

What is the difference between 610 Limestone and clean #57 Limestone?

610 Limestone, also called #610 or 610 base, contains crushed material and fines that compact into a base course. It aligns with DOTD Section 1003 Class II base course. #57 Limestone, also called 57 rock or clean limestone, has open spaces between the stone pieces and is used for drainage layers or a clean stone surface.

Which ZIP codes should be used for a Gretna material delivery?

Use 70053 or 70056 when the delivery address is in Gretna. Enter the complete address when ordering online and select the delivery date that fits the project schedule. Check access and the unloading location before the truck arrives.

Nearby