Skip to main content
FREE Delivery!|(504) 389-7856
Delivered Gravel and Base Stone for Hammond

Delivered Gravel and Base Stone for Hammond

Hammond is a small city or town in Tangipahoa Parish. New gravel drives and worn driveways both need a firm base, a planned finish depth and a place for water to move away from the surface. Louisiana Rock Supply lists bulk stone, sand and soil for jobs where material needs to be measured before delivery.

Bulk materials for Hammond driveway and yard work

Start with the job at hand. 610 Limestone is a compacting base for driveways, pads and paver work. Road Base is another base option for projects that need a dense, compacted layer. Natural Pea Gravel works well as a loose finish material for driveways and walking areas, while Washed sand and Topsoil cover grading and finish work.

For a gravel drive, place the base in lifts and compact each lift before adding more material. A 4 to 6 inch compacted base suits many light-use pads and driveways, while heavier traffic or soft ground calls for a deeper design based on site conditions. Use Natural Pea Gravel as a finish layer only where a loose stone surface fits the project.

Ground, frost and drainage in Tangipahoa Parish

Louisiana ground work centers on water management. A high water table, gumbo clay and subsidence put pressure on a base that stays wet, so build pads up where the site needs elevation instead of cutting deeper into soft ground. Shape the finished surface so water leaves the drive or pad rather than collecting in the stone.

610 Limestone, also called #610 or 610 base, is identified with DOTD Section 1003 Class II base course. Its mixed particle sizes compact into a tighter layer than a clean loose stone. On wet ground, compacting in controlled lifts and keeping the edge supported helps the base hold its shape.

Louisiana's statewide frost-depth guide is 6 inches. Confirm frost and foundation requirements with the local building department before building a shed pad, slab base or other structure, since water and soil conditions still control much of the site preparation.

Delivery planning for Hammond and nearby towns

Hammond sits about 34 miles north of Kenner. Within the surrounding area, Albany lies about 9 miles west, Independence lies about 10 miles northwest, and Ponchatoula lies about 11 miles southeast. Livingston is about 18 miles southwest, Covington is about 20 miles east, and Walker is about 21 miles west.

Delivery planning covers Tangipahoa Parish and nearby areas with access suited to a loaded truck. Use ZIP codes 70401 and 70403 when entering the delivery location. Before choosing a delivery date, check that the approach is clear of parked vehicles, low branches, soft ground and other obstructions. Mark the dump spot, and keep the route to it firm enough for truck traffic.

Measure before you order

Use the online calculator to enter the project length, width and depth, then select the material needed for the job. Place the order online and choose a delivery date after confirming truck access and the dump location.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Hammond, LA

How much stone does a Hammond driveway or patio base need?

Measure the length and width of the area, then multiply those figures for square footage. Multiply the area by the planned depth, converted to feet, to find cubic feet before using the calculator for tons or cubic yards. Add depth for the compacted base, then account for the loose material needed before compaction.

Should I use Topsoil or Select Fill for a low yard spot?

Select Fill is the better starting material where a low spot needs grade built up and compacted. Topsoil belongs near the surface where grass or planting is planned. For a spot that stays wet, address the path of the water before placing either material.

Which base stone works under pavers or a shed in Tangipahoa Parish?

610 Limestone is the local base material for a compacted paver or shed pad. It is also called #610, 610 base or crushed limestone base. Place it in lifts, compact each layer, and keep the finished base above surrounding ground where drainage calls for added height.

Which ZIP codes are associated with Hammond?

Hammond uses ZIP codes 70401 and 70403. Enter the full delivery address with the ZIP code so the delivery location and access notes match the order.

Nearby