Pea Gravel for Pathways in Pollock, LA

Louisiana Rock Supply handles gravel and aggregate delivery in Pollock, LA, and the working season here runs all year. Wet clay in the draws is what stops a compaction pass, so timing a load matters more than the calendar month.

If your project starts with a base, that base is 610 limestone.

Paths and walkways are a different job. Those want fines and screenings, not a coarse base stone, and the difference shows up underfoot within a season.

Ground and Conditions in Pollock

Pollock sits in Grant Parish, in the northern and western uplands. The surface here is sandy loam over clay, and the two layers behave nothing alike.

The sandy loam takes water. The clay beneath it does not, so water moves sideways down the slopes and gathers in the draws.

That is why a thin base course fails here: it pumps, shifts and ruts where the clay holds moisture.

Bare sandy slopes also cut gullies quickly once the cover is gone, and the draws scour at the ditches and streams. A path or drive edge left open is where that starts.

The fix is a base that binds and a surface that sheds. 610 limestone is the Louisiana base for that reason: stone dust up to about two inches, so the fines bind it and it hardens as it is rolled.

Materials for Pollock Projects

For paths and walkways, the material that does the work is the fine end of the yard: screenings, small clean stone and a packed surface that stays put underfoot.

Stone Screenings, also called limestone screenings, are the crusher fines that pass the finest screen. They bed pavers, fill joints and pack a path top into a firm surface.

Walkway Gravel is the finer gravel that packs underfoot for garden paths and walkways. It is a surfacing material, so it goes over a prepared base rather than straight onto raw ground.

#89 Crushed Stone is a fine clean stone for paver joints and thin bedding layers. #8 Crushed Stone, roughly 3/8 inch, covers fine drainage and paver bedding.

Under all of it, 610 Limestone is the compacted layer for driveways, parking pads, shed pads and the ground beneath flatwork. Crushed Concrete is the recycled option, a dense graded base of crushed Portland cement concrete with the fines left in, and Louisiana permits it as a Class II base course material.

Delivery to Pollock and the Surrounding Area

You order online and a dump truck tips the load on site. Quantities are ordered by the ton or by the yard, and each product page has a calculator to size the load.

Bulk delivery reaches Pollock and the rest of Grant Parish, including Colfax, Montgomery, Dry Prong, Georgetown and Bentley.

Have the drop spot clear and reachable before the truck arrives. The driver tips the pile where the truck can safely stop, so pick a spot that stays firm when the ground is wet.

Questions About Ordering in Pollock

What should I have ready when the truck arrives?

Clear the drop area and make sure the truck can reach it without crossing soft ground. A load is tipped in one pile, so the spot you choose is where the material stays.

If the ground is wet clay, pick higher ground that will still hold a loaded truck.

What is the best base under pavers in Pollock?

610 limestone is the base for paver work here, because the fines bind and it hardens as it is rolled. Over it, stone screenings or mason sand give you a smooth setting bed.

The sandy loam over clay in this part of the state is why the compacted layer matters.

Order Your Path Material for Pollock

Start with the calculator on the product page to set your tonnage or yardage, then choose a delivery date at checkout. Screenings, walkway gravel and 610 limestone are all ready to order for delivery in Pollock and across Grant Parish.