Driveway Gravel
3/4" stone for building or resurfacing a gravel driveway
From 1 Ton Delivered
Cost per ton lowers the more you order!

Franklin Parish, Louisiana
Free delivery to Baskin on every order, with loads arriving in as fast as 2 business days.
Delivering to Baskin, LA
Open any product to see your delivered price.
3/4" stone for building or resurfacing a gravel driveway
From 1 Ton Delivered
Cost per ton lowers the more you order!
All-purpose stone up to 1" for drainage, concrete and bases
From 1 Ton Delivered
Cost per ton lowers the more you order!
Stone-and-dust blend that packs hard under drives and patios
From 1 Ton Delivered
Cost per ton lowers the more you order!
Rounded 1" to 3" stones for beds, borders and drainage
From 1 Ton Delivered
Cost per ton lowers the more you order!
Angular 3/4" stone for drainage beds and concrete slab bases
From 1 Ton Delivered
Cost per ton lowers the more you order!
3/8" stone that's comfortable underfoot for paths and walks
From 1 Ton Delivered
Cost per ton lowers the more you order!
Compactable dirt for grading, backfill and low spots
From 1 Ton Delivered
Cost per ton lowers the more you order!
Screened topsoil for lawns, gardens and flower beds
From 1 Ton Delivered
Cost per ton lowers the more you order!
Pick the material and quantity.Open a product to see the delivered price for Baskin.
Choose a delivery date at checkout.As fast as 2 business days for most Baskin addresses.
Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.
Not sure how much you need?
Enter length, width and depth and the calculator returns the cubic yards and tons for your project.
Open the calculatorLouisiana Rock Supply handles gravel and aggregate delivery in Baskin, LA for two kinds of buyers: contractors building pads and flatwork, and homeowners bedding a patio or walkway. Both end up asking for the same material by its local name, 610 limestone.
Baskin sits in Franklin Parish, on ground laid down by the rivers, where the clay holds water and the base under a slab has to be built right the first time.
Across the Mississippi and Red River alluvial plains, the ground is recent alluvium: silty clay and clay loam, deep and heavy, with sandier ridges along the old channels and backswamp clay in the low ground between them.
That clay will not take water. The land is flat, so rain sits until it is ditched or pumped away, and a thin base over it shows the failure fast.
The slab rocks, the joints open, and the pavers settle out of line.
The fix is a base that binds and a drainage layer that moves water off. A fines-bearing base like 610 limestone hardens as it is rolled, so it carries flatwork instead of pumping.
Clean stone under and beside the work gives the water somewhere to go.
Work runs year round here. Heavy rain and saturated clay, not cold, are what stop a compaction pass, so the calendar matters less than what the ground is doing that week.
Bedding under pavers and flatwork is where the material choice shows up first. The base course carries the load, and the bedding layer sets the surface.
Get either wrong and the patio moves.
610 Limestone, also called #610 or 610 base, is the Louisiana base course. The stone dust runs up to about two inches, so the fines bind it and it hardens as it is rolled.
It goes under driveways, parking pads, shed pads and the compacted layer beneath flatwork.
Road Base is recycled Portland cement concrete, crushed and screened to a dense graded size with the fines left in. Louisiana permits it as a Class II base course material, and it is a real base option, not a substitute for crushed limestone.
Above the base, bedding and jointing decide how the surface sits. Stone Screenings are the crusher fines that pass the finest screen, and they bed pavers and pack a path top.
Mason Sand is the finest washed sand, used for a smooth paver setting bed and for mortar and block work.
Where water has to move, Drain Rock is clean washed stone with the fines taken out, for French drains, foundation perimeter drains, drywells and downspout runs. On ground with a water table this close to the surface, that drainage layer is the part that has to work.
For lawns and beds over heavy clay, Top Soil is the growing layer for grade repair, and Garden Soil is a blended planting soil for raised beds, which suit ground that sits wet.
You order online, choose a quantity by the ton or by the yard, and pick a delivery date at checkout. Each product page has a calculator if you want to size the load before you commit.
A dump truck tips the load on site in one pile, so it helps to know where that pile should land before the truck arrives.
Louisiana Rock Supply delivers across Franklin Parish, including Winnsboro, Wisner, Gilbert and Fort Necessity, as well as Baskin itself.
It depends on what the drive needs. A new drive over clay wants 610 limestone as the base, because the fines bind it and it hardens as it is rolled.
An existing drive that already has a solid base can be topped with clean stone. Road Base works as a dense graded base course too, and Louisiana permits it as a Class II material.
Quantities are ordered by the ton or by the yard. Each product page has a calculator, and that is the place to size the load for your own area and depth.
Have your measurements ready before you order so the quantity matches the work.
Start with the calculator on the product page, settle your quantity, and choose a delivery date at checkout. Louisiana Rock Supply brings bulk 610 limestone, Road Base, screenings, sand and drain rock to sites across Baskin and Franklin Parish.
Place your order online when you are ready.
What buyers ask us before they order.
It depends on what the drive needs. A new drive over clay wants 610 limestone as the base, because the fines bind it and it hardens as it is rolled. An existing drive that already has a solid base can be topped with clean stone. Road Base works as a dense graded base course too, and Louisiana permits it as a Class II material.
Quantities are ordered by the ton or by the yard. Each product page has a calculator, and that is the place to size the load for your own area and depth. Have your measurements ready before you order so the quantity matches the work.
You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.