Crushed Stone, Sand and Gravel in Clayton, LA

Louisiana Rock Supply handles gravel and aggregate delivery in Clayton, LA for contractors and homeowners alike. Some buyers are building a pad or a drive from bare ground, and some are topping up a bed or a lawn.

On ground this heavy, 610 limestone is the base that carries the load, and the soil products do the grading and bed prep around it. You order online and a truck tips the material on site.

Materials for Clayton Projects

Grading and bed prep come first on most lots here, because the natural ground is heavy clay rather than anything a lawn or a bed wants. That makes the soil and fill products the starting point, with the stone and sand layered on top of them.

Top Soil is the growing layer for lawns, beds and grade repair. Spread it over ground that has been shaped and it gives roots something to work in.

Garden Soil is a blended planting soil for raised beds and vegetable gardens. Raised beds earn their keep here, since the natural ground sits wet.

For raising low ground, Select Fill builds a pad up out of the water and compacts rather than settling. Louisiana yards also list river silt and spillway dirt beside it as grade raising material.

Once the grade is right, 610 Limestone is the local base for driveways, parking pads, shed pads and the compacted layer under flatwork. Stone dust up to about two inches binds it, so it hardens as it is rolled.

Above that base, #57 Limestone is the clean open graded size at about 3/4 inch with no fines, and it is the usual choice for drainage and concrete work.

Road Base is a recycled Portland cement concrete base, crushed and screened with the fines left in, and Louisiana permits it as a Class II base course material.

For decorative work, River Rock covers beds and borders where nothing has to compact, and Shredded Mulch dresses beds, tree rings and slopes.

Ground and Conditions in Clayton

Across the Mississippi and Red River alluvial plains, the ground is recent alluvium: silty clay and clay loam laid down by the rivers, deep and heavy, with sandier natural levee ridges along the old channels and backswamp clay in the low ground between them.

The water is the part that shapes the work. A high water table sits under flat land, and the clay will not take water, so rain stands in the backswamp until it is pumped or ditched away.

That changes what you order. On ground with a water table this close to the surface, the drainage layer is the part that has to work, which is why clean stone like drain rock or #57 limestone belongs where water needs to move.

Erosion follows the same pattern: river and bayou bank cutting, sheet flow across bare clay after a hard rain, and ditch and canal scour. Rounded stone does not lock together, so it is not bank armour; riprap is the angular stone for that job.

Work runs year round here. Heavy rain and saturated clay, not cold, are what stop a compaction pass.

Delivery to Clayton and the Surrounding Area

Bulk material arrives on a dump truck that tips the load in one pile on site. Have the drop area clear and reachable, and know where you want that pile to land before the truck arrives.

You order online, choose a quantity by the ton or by the yard, and pick a delivery date at checkout. Each product page has a calculator if you want to size the load yourself.

Clayton sits in Concordia Parish, and delivery covers the surrounding area, including Vidalia, Ferriday, Monterey and Acme.

Order Your Load for Clayton

Louisiana Rock Supply delivers base, washed stone, sand, soil and decorative material for driveways, pads, drainage, grading and bed prep in Clayton. Choose your material, set the quantity by the ton or yard, and place the order online.