Skip to main content
FREE Delivery!|(504) 389-7856

Rapides Parish, Louisiana

Fill and Base Material Delivered in Glenmora, LA

Free delivery to Glenmora on every order, with loads arriving in as fast as 2 business days.

Delivering to Glenmora, LA

Open any product to see your delivered price.

  • Order from 1 ton
  • As fast as 2 business days
  • Dump truck delivery

Good starting points for Louisiana projects

All 27 products

From order to drop-off

  1. 1

    Pick the material and quantity.Open a product to see the delivered price for Glenmora.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Glenmora addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Louisiana Rock Supply handles gravel and aggregate delivery in Glenmora, LA, and the ground here shapes what you should order. The uplands around Glenmora run sandy loam over clay, rolling rather than flat, so water moves sideways down the slopes instead of soaking away.

That is why 610 limestone matters so much on this side of Rapides Parish. The fines bind it and it hardens as it is rolled, which is what a pad or a drive needs when the ground under it stays soft.

Delivery to Glenmora and the Surrounding Area

You order online, pick a quantity by the ton or by the yard, and a dump truck tips the load on your site. Each product page has a calculator if you want to size the load before you check out.

Glenmora sits in Rapides Parish, and delivery reaches the surrounding area as well, including Alexandria, Pineville, Ball, Woodworth and Boyce. Pick your delivery date at checkout and the truck arrives with your material.

Bulk loads arrive as one tipped pile. Have the spot cleared and reachable before the truck gets there, because the driver tips the load and moves on.

Materials for Glenmora Projects

Raising grade and building pads is the work that decides most of these projects. Low ground and wet draws need fill that compacts, and then a base course on top of it that will hold.

Start with Select Fill when you need to build a pad up out of the water. It compacts rather than settling, so it belongs under a base course and not under a lawn.

Spillway dirt is a second term Louisiana yards use for coarse fill from borrow areas.

On top of that fill, 610 Limestone is the base. Stone dust up to about two inches with the fines left in, so it binds and hardens under a driveway, a parking pad, a shed pad, or the compacted layer under flatwork.

Crushed Concrete is the other base option. It is recycled Portland cement concrete, crushed and screened to a dense graded size with the fines left in, and Louisiana permits it as a Class II base course material.

It is not crushed quarry stone.

For a driveway surface over a finished base, #57 Limestone is the clean open graded size at about 3/4 inch with no fines. Driveway Gravel tops an existing drive.

For drainage, Drain Rock is clean washed stone with the fines taken out, for French drains, foundation perimeter drains, drywells and downspout runs. #4 Crushed Stone handles heavy drainage and stabilising very wet ground.

Ground and Conditions in Glenmora

Across the northern and western uplands, the surface is sandy loam over Tertiary sands and clays. The sandy loam takes water and the clay beneath it does not, so water moves sideways down the slopes and gathers in the draws.

Slope is what moves water here, not a water table. A pad built on ground that sheds water sideways needs fill that compacts, because an under-built base on a slope will not hold.

Bare sandy slopes gully quickly once the cover is gone, and the draws scour. That is the case for riprap on a bank edge and for getting cover back onto bare ground.

Work runs year round in this part of Louisiana. Wet clay in the draws is what stops a compaction pass, so timing around that matters more than the season.

Questions from Glenmora Buyers

What is the best base under pavers in Glenmora?

610 limestone is the base to use. The stone dust and fines bind it and it hardens as it is rolled, which gives pavers a firm setting layer over the sandy loam here.

Bed the pavers themselves in Stone Screenings or Mason Sand, both of which pack smooth and hold a joint.

Do you supply contractors working in Glenmora?

Yes. Contractors order the same way anyone else does: online, by the ton or by the yard, with a delivery date picked at checkout.

Bulk loads arrive as one tipped pile on site, and the calculator on each product page helps size the load before you order.

Order 610 Limestone and Base Material in Glenmora

610 limestone is the base that carries drives, pads and flatwork in Glenmora, and select fill is what gets a wet pad up out of the ground first. Louisiana Rock Supply delivers both across Rapides Parish.

Order online, size your load, and pick your delivery date.

Before you order

What buyers ask us before they order.

What is the best base under pavers in Glenmora?

610 limestone is the base to use. The stone dust and fines bind it and it hardens as it is rolled, which gives pavers a firm setting layer over the sandy loam here. Bed the pavers themselves in Stone Screenings or Mason Sand, both of which pack smooth and hold a joint.

Do you supply contractors working in Glenmora?

Yes. Contractors order the same way anyone else does: online, by the ton or by the yard, with a delivery date picked at checkout. Bulk loads arrive as one tipped pile on site, and the calculator on each product page helps size the load before you order.

What happens if the weather turns?

We would rather move a delivery than tear up your ground. If the site is too wet for the truck on the day, we will call you and rebook. Tell us in advance about any part of the approach that does not drain and we will plan around it.