Driveway Gravel
3/4" stone for building or resurfacing a gravel driveway
From 1 Ton Delivered
Cost per ton lowers the more you order!

Rapides Parish, Louisiana
Free delivery to Hineston on every order, with loads arriving in as fast as 2 business days.
Delivering to Hineston, LA
Open any product to see your delivered price.
3/4" stone for building or resurfacing a gravel driveway
From 1 Ton Delivered
Cost per ton lowers the more you order!
All-purpose stone up to 1" for drainage, concrete and bases
From 1 Ton Delivered
Cost per ton lowers the more you order!
Stone-and-dust blend that packs hard under drives and patios
From 1 Ton Delivered
Cost per ton lowers the more you order!
Rounded 1" to 3" stones for beds, borders and drainage
From 1 Ton Delivered
Cost per ton lowers the more you order!
Angular 3/4" stone for drainage beds and concrete slab bases
From 1 Ton Delivered
Cost per ton lowers the more you order!
3/8" stone that's comfortable underfoot for paths and walks
From 1 Ton Delivered
Cost per ton lowers the more you order!
Compactable dirt for grading, backfill and low spots
From 1 Ton Delivered
Cost per ton lowers the more you order!
Screened topsoil for lawns, gardens and flower beds
From 1 Ton Delivered
Cost per ton lowers the more you order!
Pick the material and quantity.Open a product to see the delivered price for Hineston.
Choose a delivery date at checkout.As fast as 2 business days for most Hineston addresses.
Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.
Not sure how much you need?
Enter length, width and depth and the calculator returns the cubic yards and tons for your project.
Open the calculatorLouisiana Rock Supply handles gravel and aggregate delivery in Hineston, LA for two kinds of buyers: contractors building pads and flatwork, and homeowners finishing a drive or a patio. Both end up asking the same thing, which is what goes under the finished surface.
In this part of the state that answer usually starts with 610 limestone, the crushed limestone base this market specifies by name.
Across the northern and western uplands, the ground runs to sandy loam over clay, and the two layers behave differently. The sandy loam surface takes water in.
The clay beneath it does not.
So water moves sideways down the slopes and gathers in the draws rather than soaking away. Slope, not a water table, is what moves it here.
That matters most under pavers and flatwork. A thin base course over ground like this shows its weakness at the edges first, where the material spreads and the surface above it starts to move.
Bare sandy slopes also cut quickly once the cover is gone, so gullies open on exposed ground and ditches scour in the draws. The fix on both counts is a base that is built to hold, not a surface dressing over soft ground.
Work runs year round here. Wet clay in the draws is what stops a compaction pass, so the draws set the schedule more than the season does.
Bedding under pavers and flatwork is where the material choice shows. The setting bed and the base below it do different jobs, and the sizes that suit one will not suit the other.
610 limestone is the base. It is a crushed limestone base with stone dust up to about two inches, and the fines bind it so it hardens as it is rolled.
That is what a driveway, a parking pad, a shed pad or the layer under flatwork sits on.
Crushed concrete is the other base option. It is recycled Portland cement concrete, crushed and screened to a dense graded size with the fines left in, and Louisiana permits it as a Class II base course material.
It is not crushed limestone, and it is not sold as such.
Above the base, the setting bed wants a fine material that packs flat. Stone screenings are the crusher fines that pass the finest screen, and they bed and joint pavers and pack the top of a path.
Mason sand is the finest washed sand, for a smooth paver setting bed and for mortar and block work.
Where the bed sits over open ground, washed sand beds pipe and flatwork and backfills where a clean fine material is wanted. #8 crushed stone is a small clean stone at roughly 3/8 inch for fine drainage and paver bedding, and #89 crushed stone is finer still for paver joints and thin bedding layers.
You order online, and quantities are sold by the ton or by the yard. Choosing between the two is the part worth pausing on, because the right unit depends on how the material is measured and how you plan to place it.
Each product page has a calculator, and that is the place to size the load before you order. Pick your delivery date at checkout, and a dump truck tips the material on site in one pile.
Hineston sits in Rapides Parish, and delivery covers the surrounding area, including Alexandria, Pineville, Ball, Woodworth and Glenmora.
Start with the calculator on the product page and settle your quantity before you order. From there, choose your delivery date at checkout and Louisiana Rock Supply brings the load to your site in Hineston.
What buyers ask us before they order.
It depends on which layer you are talking about. The base is 610 limestone, a crushed limestone base whose fines bind it and harden it as it is rolled. On top, a clean open graded stone such as #57 limestone, about 3/4 inch with no fines, gives you a drive surface that sheds water instead of holding it.
That depends on your area and how the material is being used, so the honest answer is to size it rather than guess. Each product page has a calculator, and quantities are ordered by the ton or by the yard. Work out the figure there, then place the order online.
We would rather move a delivery than tear up your ground. If the site is too wet for the truck on the day, we will call you and rebook. Tell us in advance about any part of the approach that does not drain and we will plan around it.