Driveway Gravel
3/4" stone for building or resurfacing a gravel driveway
From 1 Ton Delivered
Cost per ton lowers the more you order!

St. Tammany Parish, Louisiana
Free delivery to Abita Springs on every order, with loads arriving in as fast as 2 business days.
Delivering to Abita Springs, LA
Open any product to see your delivered price.
3/4" stone for building or resurfacing a gravel driveway
From 1 Ton Delivered
Cost per ton lowers the more you order!
All-purpose stone up to 1" for drainage, concrete and bases
From 1 Ton Delivered
Cost per ton lowers the more you order!
Stone-and-dust blend that packs hard under drives and patios
From 1 Ton Delivered
Cost per ton lowers the more you order!
Rounded 1" to 3" stones for beds, borders and drainage
From 1 Ton Delivered
Cost per ton lowers the more you order!
Angular 3/4" stone for drainage beds and concrete slab bases
From 1 Ton Delivered
Cost per ton lowers the more you order!
3/8" stone that's comfortable underfoot for paths and walks
From 1 Ton Delivered
Cost per ton lowers the more you order!
Compactable dirt for grading, backfill and low spots
From 1 Ton Delivered
Cost per ton lowers the more you order!
Screened topsoil for lawns, gardens and flower beds
From 1 Ton Delivered
Cost per ton lowers the more you order!
Pick the material and quantity.Open a product to see the delivered price for Abita Springs.
Choose a delivery date at checkout.As fast as 2 business days for most Abita Springs addresses.
Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.
Not sure how much you need?
Enter length, width and depth and the calculator returns the cubic yards and tons for your project.
Open the calculatorIf you are planning a driveway, a patio base or a drainage run in Abita Springs, LA, the material has to match the ground under it. Gravel and aggregate delivery here starts with that choice.
Louisiana Rock Supply sells 610 limestone and the supporting stone, sand and soil a job like that takes, ordered online and tipped on site.
This part of the Florida parishes pine flatwoods looks sandy on top. The layer under it is not.
A thin base course is the mistake you see on flat ground here. The surface reads as free draining and the material goes down shallow.
Then the wet season arrives. Flatwoods ground is level to gently sloping terrace under pine, with a sandy or silt loam surface over a dense, slowly permeable subsoil.
Seasonal high water sits in the top of the profile.
Water gets through the sand and stops at the dense layer. Once the subsoil is saturated, a shallow base has nothing under it to carry a load, so it rutts and pumps and the edges break away.
The fix is a properly built base course, not a thicker surface stone. You excavate to the depth your plan calls for, then build up with a fines-bearing base that compacts into a hard layer.
Select fill raises a low pad out of the water first, and the base goes over that.
Grade is the other thing that moves. Bare flat ground sheds sheet flow, ditch edges scour, and the sandy surface rills where grade is left exposed.
Clean stone in a drainage run and riprap on a scoured bank both hold ground that would otherwise wash.
Work runs year round. Wet ground, not cold, sets the schedule, so a drainage layer that works in a wet season earns its place.
Paths and walkways are where the fine material does the work, and that is the family to look at first. A walkway needs a surface that packs underfoot and stays put, not a clean stone that rolls loose under a shoe.
Stone screenings are the crusher fines that pass the finest screen. They bed pavers, fill joints and top a path into a firm, tight surface.
For a garden path or a walkway, walkway gravel is the finer crushed size that packs down and stays put.
Under pavers, the setting bed matters as much as the surface. Mason sand is the finest washed sand and takes a smooth paver bed.
#89 Crushed Stone fills the joints between them.
Where a path crosses wet ground, the base under it has to drain. 610 Limestone, also called 610 base or CR610, is the Louisiana base size, running from stone dust up to about two inches.
The fines bind it and it hardens as it is rolled, which is what a drive, parking pad or building pad wants under it.
For open drainage and concrete work, #57 Limestone is the clean size, about 3/4 inch with no fines. Drain Rock is washed clean for French drains, downspout runs and foundation perimeter drains, and it holds up on ground where the water table sits close.
Quantities are ordered by the ton or by the yard, and the choice usually comes down to how the material is sold rather than how it is used. Each product page has a calculator if you want to size the load before checkout.
You order online, pick a delivery date at checkout, and a dump truck tips the load in one pile at the site. Abita Springs sits in St.
Tammany Parish, and delivery covers the surrounding area, including Slidell, Mandeville, Covington, Lacombe and Pearl River.
Have the drop spot clear before the truck arrives. A bulk load comes off the bed in one pile, so the ground it lands on should be firm and reachable from the road.
Clear the drop area and make sure the truck can reach it from the road. The load tips in one pile, so the spot needs firm ground and enough room for the material to sit without blocking anything.
Move vehicles, trailers and anything else out of the way first, and check that overhanging limbs or low wires will not stop the truck getting in.
On flatwoods ground, start with a base course that compacts, then bed the pavers. 610 limestone is the Louisiana base size, with fines that bind it into a hard layer as it is rolled.
Mason sand takes a smooth setting bed over that, and stone screenings or #89 crushed stone fill the joints. On wet ground, put a drainage layer under the base.
Size the load on the product page calculator, then order by the ton or yard and pick your delivery date at checkout. If you are building a path, a drive or a drainage run in Abita Springs, Louisiana Rock Supply delivers the material to your site.
Place your order online when you know the quantity.
What buyers ask us before they order.
Clear the drop area and make sure the truck can reach it from the road. The load tips in one pile, so the spot needs firm ground and enough room for the material to sit without blocking anything. Move vehicles, trailers and anything else out of the way first, and check that overhanging limbs or low wires will not stop the truck getting in.
On flatwoods ground, start with a base course that compacts, then bed the pavers. 610 limestone is the Louisiana base size, with fines that bind it into a hard layer as it is rolled. Mason sand takes a smooth setting bed over that, and stone screenings or #89 crushed stone fill the joints. On wet ground, put a drainage layer under the base.
You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.